Kitchen Cabinet Molding Options

Some Common Kitchen Cabinet Molding Options

When it comes to kitchen décor, customized cabinets go a long way in enhancing its ultimate beauty. And one way to give your kitchen cabinets an influential look and feel is through cabinet molding. In other words, kitchen cabinet molding options play a big role as far as kitchen décor and value are concerned. This makes it important to carefully choose the molding you use on your cabinets.

Nonetheless, there are so many options to go for as far as kitchen cabinet molding is concerned. Worth mentioning, molding not only adds detail to the cabinetry. It also plays a huge role in strengthening and reinforcing your cabinetry. Molding also helps enhance kitchen safety by hiding all the sharp edges that may cause injury. Depending on the kitchen design and material used, it’s important that you coordinate all these aspects for a perfect finish. Here are some of the most common kitchen cabinet molding options you may want to know about.

Five Kitchen Cabinet Molding Options

Crown Molding

Just like the name suggests, the molding goes at the top of the cabinet. It helps form a decorative feature to increase elegance. Crown molding is a great way to increase visual attention to the top cabinets especially. They’re available in a wide variety of sizes, shapes, patterns, and designs.

Riser Moldings

Riser moldings are what one can call secondary cabinet moldings. They are attached to crown molding so that it extends to the kitchen ceiling. It can be an amazing way to seal off the space between the crown molding and the ceiling. At the same time, they add elegance and value to your kitchen.

Base Moldings

Base moldings are a great way to add some detail to the base of the cabinets. You can also enhance uniformity by installing floor molding in your kitchen to complement your base moldings. In other words, it involves matching the base molding with the floor molding. They add a foundational type of detail that attracts the eye towards your kitchen cabinets.

Scribe Moldings

This is another option among the most common types of kitchen cabinet molding you can choose from. It is basically a trim that fills the gaps between the walls and the cabinets. They help to deal with inconsistencies in the cabinetry finishing. Apart from just enhancing elegance, they can be used to hide the mistakes of the contractor who did your cabinets.

Fillers

Fillers are not only important in hiding nail marks, knots, and cracks. They also add up as moldings as they help fill up small spaces between the cabinets and the walls. They can also be used to cover inconsistencies and spaces left during molding installation.

Kitchen Molding Options – Common Materials

Some of the most commonly used molding materials include the following:

• Solid wood
• Plaster
• MDF
• Polyvinylchloride

Solid Wood

Let’s start off with the obvious and most common material, wood. Wooden moldings are made from mostly hardwoods such as oak and mahogany. This is because of the aesthetic value that these woods have. Seasoned carpenters will tell you that they show off their grains when appropriately stained. However, new technology has made wood the second option, especially because wood warps and shrinks depending on the weather. This makes it hard for precise fitting. Nonetheless, softwood options are also available.

Plaster Moldings

This one is among the new and most expensive options you can find. Plaster moldings are custom-made designs that are crafted with a lot of precision and design. However, they are also quite challenging to use since they can crack easily during installation. They’re mostly made from concrete cement.

MDF Moldings

MDF moldings are renowned for their impressive affordability, in addition to the fact that they’re lightweight. These low-cost moldings are easy to install because of the weight aspect. They cut and bend to fit easily. However, they can have a short lifespan, especially in high-humidity areas. They tend to last longer in the drier, less humid climates/areas.

PVC

Polyvinylchloride is a material with many applications in building and construction. PVC moldings are preferred by many, especially due to their impressive resistance to warping and breaking. Being synthetic, PVC moldings can be crafted in designs similar to those of wood and plaster. This means that you may fail to actually tell the difference between the PVC and the rest.

Moldings are a great way to enhance the kitchen cabinets’ detail and curb appeal. To add on this, you have plenty of options on the materials and the designs to use when it comes to the architectural detailing.

Kitchen Cabinet Molding Options – Recommendations

1: 8-foot Prefinished Polystyrene Bed Moulding 1.675 inch

• Buy From: Lowes
• Price: $4.97
• Link: https://is.gd/6wu9R5

2: Legacy Heritage 2.5-in Half Round Reed Column Molding

• Buy From: Van Dyke’s Restorers
• Price: $40.42
• Link: https://is.gd/iTs7zL

Scroll to Top